DIN6923 SS304 A2-70 Stainless Steel Hex Flange Nuts With Serrated
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten two or more parts together. The two partners are kept together by a combination of their threads' friction, a slight stretching of the bolt, and compression of the parts to be held together.
Carbon Steel Flange Nut Mechanical Properties and Material Chemical Composition:
|SIZE||ALL SIZE||COAESE THREAD||FINE THREAD ≦M16||FINE THREAD >M16||COAESE THREAD ﹤M16||COAESE THREAD ≧M16||COAESE THREAD ALL SIZE||ALL SIZE|
|COMMON MATERIALS||1008 ~ 1015||10B21 ~ 35ACR||1008 ~ 1015||1015||10B21 ~ 35ACR||10B21 ~ 35ACR||10B21 ~ 35ACR||10B21 ~ 35ACR||10B21 ~ 35ACR||10B21 ~ 35ACR|
|ML08AL SWRCH8A~ SWRCH15A||ML08AL SWRCH8A~ SWRCH15A||SWRCH15A|
In applications where vibration or rotation may work a nut loose, various locking mechanisms may be employed: lock washers, jam nuts, specialist adhesive thread-locking fluid such as Loctite, safety pins (split pins) or lockwire in conjunction with castellated nuts, nylon inserts (Nyloc nut), or slightly oval-shaped threads.
The most common shape is hexagonal, for similar reasons as the bolt head - 6 sides give a good granularity of angles for a tool to approach from (good in tight spots), but more (and smaller) corners would be vulnerable to being rounded off. It takes only 1/6th of a rotation to obtain the next side of the hexagon and grip is optimal. However polygons with more than 6 sides do not give the requisite grip and polygons with fewer than 6 sides take more time to be given a complete rotation. Other specialized shapes exist for certain needs, such as wingnuts for finger adjustment and captive nuts (e.g. cage nuts) for inaccessible areas.
A wide variety of nuts exists, from household hardware versions to specialized industry-specific designs that are engineered to meet various technical standards. Fasteners used in automotive, engineering, and industrial applications usually need to be tightened to a specific torque setting, using a torque wrench. Nuts are graded with strength ratings compatible with their respective bolts; for example, an ISO property class 10 nut will be able to support the bolt proof strength load of an ISO property class 10.9 bolt without stripping. Likewise, an SAE class 5 nut can support the proof load of an SAE class 5 bolt, and so on.